Matla a AM series diode laser e fihla ho 200W / bar.Bophelo ba ho sebetsa, ho feto-fetoha ha tikoloho le nako ea polokelo ea li-lasers tsa semiconductor li ntlafatsoa haholo.
AM Series diode laser e amohela solder e thata ea AuSn le thepa ea sink ea mocheso e ts'oanang le coefficient ea katoloso ea mocheso, e qobang ka nepo liphoso tsa indium joalo ka mokhathala oa mocheso, ho falla ha electrothermal le oxidation.Hajoale, tlhahiso ea matla ea letoto lena la lihlahisoa e tla ntlafatsoa ho 250W / bar, 'me bophahamo ba sephutheloana sa bar e le' ngoe bo tla fokotsoa ho 2.38mm.
Wavelength: 940nm
Matla: 200W / Bar
Packaging ea AuSn
Matla a phahameng
Bophahamo bo tlase ba sephutheloana
E rapameng/E thethehileng ka stacking
Lisebelisoa:
Ho roala
Pompo
Ho sebetsa ha indasteri
- Sebelisa phepelo ea motlakase ea hajoale ho qoba ho eketseha ha hona joale nakong ea ts'ebetso.
- Laser diode e tlameha ho sebelisoa ho latela litlhaloso.
- Laser diode e tlameha ho sebetsa ka pholile e ntle.
- mocheso oa ts'ebetso o tloha ho 20 ℃ ho isa ho 30 ℃.
- Mocheso oa polokelo o tloha ho -20 ℃ ho ea ho +55 ℃.
Bonyane Bongata ba Order: 1 Piece / Likotoana
Melao ea Tefo: T/T
Matla a Phepelo: 100,000 / selemo
Micro Channel Cooled Horizontal Stack
E2Y-940.3-200C-H03.1(3×1)
Litlhaloso (25°C) | Yuniti | E2Y-940.3-200C-H03.1(3×1) | |||
Bonyane | E tloaelehileng | Boholo | |||
Lintlha tsa Optical ⑴ | Mokhoa oa ho sebetsa | . | cw | ||
Bohareng ba Wavelength | nm | 940±3 | |||
Output Power Per Bar | W/bar | 200 | 220 | ||
Linomoro tsa Bar | likhomphutha | 3 | |||
Bandwidth(FWHM) | nm | 3 | 5 | ||
Phapang e potlakileng ea Axis e nang le FAC (90% ea matla) | mrad | 8 | 10 | ||
Phapang e Nyenyane ea Axis (95% ea matla) | deg | 7.5 | 9 | ||
Lintlha tsa Motlakase | Mohaho oa Hona Joale | A | 23 | 28 | |
Ts'ebetso ea Hona Joale | A | 205 | 215 | ||
Voltage e sebetsang | V/bar | 1.6 | 1.8 | ||
Moepa | W/A | 3.0 | 3.1 | ||
Katleho | % | 55 | 60 | ||
Tlhaloso ea Bar | Palo ea li-Emitters | likhomphutha | 25 | ||
Emitter Width | μm | 200 | |||
Emitter Pitch | μm | 400 | |||
Ho Tlatsa Factor | % | 50 | |||
Ba bang | Khatello | bar | <5 | ||
Sekhahla sa Phallo | L/min/bar | 0.25-0.33 | |||
Mocheso oa Metsi a Pholisa(3) | °C | 25 | |||
Tlhaloso ea Metsi a Pholisa | / | Metsi a ntšitsoeng 2.5±0.5μS/cm, pH-boleng 5.5- 8, sefe <5μm |
(1) Lintlha tse lekantsoeng tlas'a ts'ebetso ka matla a tlhahiso ea lebitso @25°C.
(2) Ho hlokahala tikoloho e sa tsitsang bakeng sa ts'ebetso le polokelo.
(3) Mocheso o sebetsang o hlalosoang ke mokotla oa sephutheloana.Sebaka se amohelehang sa ts'ebetso ke 20°C-30°C, empa tshebetso e ka fapana.
(4) Lintlha tse ka holimo ke tsa boitsebiso feela.Bakeng sa lintlha tse khethehileng, ka kopo sheba lintlha tsa thepa ea thepa.
(5) Maqhubu a mang le litlhophiso mabapi le kopo ea bareki.
Litlhaloso tse ling kaofela li tšoana le tse ka holimo
(1) Lintlha tse lekantsoeng tlas'a ts'ebetso ka matla a tlhahiso ea lebitso @25°C.
(2) Ho hlokahala tikoloho e sa tsitsang bakeng sa ts'ebetso le polokelo.
(3) Mocheso o sebetsang o hlalosoang ke mokotla oa sephutheloana.Sebaka se amohelehang sa ts'ebetso ke 20°C〜30°C, empa tshebetso e ka fapana.
(4) Lintlha tse ka holimo ke tsa boitsebiso feela.Bakeng sa lintlha tse khethehileng, ka kopo sheba lintlha tsa thepa ea thepa.
(5) Maqhubu a mang le litlhophiso mabapi le kopo ea bareki.